Controllers

Model No. NGUTC-2030-(program code #)
Model No. NGUTC-2230-(program code #) with circuit breaker

This state-of-the-art electronic thermostat is designed to control one or more heating cables operating between 120 and 240 Vac having a total current draw that does not exceed 30 A. It can be fitted with up to three temperature sensors as required by the application. Because separate temperature sensors are used, they may be installed on the pipe during the initial installation phase while the controller itself may only be installed at a later date.

Model No. NGUTC-V3AA-(program code #)

This state-of-the-art three-phase electronic thermostat is designed to control heating loads up to 600 Vac having a total current draw not exceeding 60 A. It can be fitted with up to three temperature sensors as required by the application. Because separate temperature sensors are used, they may be installed on the pipe during the initial installation phase while the controller itself may only be installed at a later date.

Model No. URTH-3608 (for metal pipe)

Urecon's mechanical thermostat model No. URTH-3608 is an inexpensive CSA approved capillary type thermostat used to control short lengths of THERMOCABLE®. Remote bulb type with adjustable temperature range 0°C to 50°C (32°F to 122°F), ambient compensated with a differential of ±2.2°C (3.75°F). Rated at 30A, 120/240 Vac, 3 m (10 ft) capillary. Capillary is permanently attached to the control and may not be lengthened, SPST contacts open on temperature rise.

Model No. URTH-3616

Similar to URTH-3608, except 7.6 m (25 ft) capillary.